submitted by tkeycoin to Tkeycoin_Official [link] [comments]
Version 1.3.0 is a powerful update to TkeySpace that our team has been carefully preparing. since version 1.2.0, we have been laying the foundation for implementing new features that are already available in the current version.
Who cares about the security and privacy of their assets is an update for you.
TkeySpace — was designed to give You full control over your digital assets while maintaining an exceptional level of security, which is why there is no personal data in the wallet: phone number, the email address that could be compromised by hackers — no identity checks and other hassles, just securely save the backup phrase consisting of 12 words.
Briefly about the TkeySpace 1.3.0 update :
Code optimization and switching to AndroidXA lot of work has been done on optimizing the code to speed up the application, improving the logic, synchronization speed, calculating the hash of cryptocurrencies, and successfully switching to AndroidX.
New section: Privacy
TORStarting with the current update, the TkeySpace wallet can communicate via the TOR network, includes new privacy algorithms, and supports 59 different currencies.
Tor is a powerful privacy feature for those who own large assets or live in places where the Internet is heavily censored.
Tor technology provides protection against traffic analysis mechanisms that compromise not only Internet privacy, but also the confidentiality of trade secrets, business contacts, and communications in General.When you enable TOR settings, all outgoing traffic from the wallet will be encrypted and routed through an anonymous network of servers, periodically forming a chain through the Tor network, which uses multi-level encryption, effectively hiding any information about the sender: location, IP address, and other data.
This means that if your provider blocks the connection, you can rest easy — after all, by running this function, you will get an encrypted connection to the network without restrictions.
In TOR mode, the wallet may work noticeably slower and in some cases, there may be problems with the network, due to encryption, some blockchain browsers may temporarily not work. However, TOR encryption is very important when Internet providers completely block traffic and switching to this mode, you get complete freedom and no blocks for transactions.
Confidentiality of transactions (the Blockchain transaction)The wallet can change the model of a standard transaction, mixing inputs and outputs, making it difficult to identify certain cryptocurrencies. In the current update, you can select one of several modes for the transaction privacy level: deterministic lexicographic sorting or shuffle mode.
Mode: Lexicographic indexingImplemented deterministic lexicographic sorting using hashes of previous transactions and output indexes for sorting transaction input data, as well as values and scriptPubKeys for sorting transaction output data;
We understand that information must remain confidential not only in the interests of consumers but also in higher orders, financial systems must be kept secret to prevent fraud. One way to address these privacy shortcomings is to randomize the order of inputs and outputs.
Lexicographic ordering is a comparison algorithm used to sort two sets based on their Cartesian order within their common superset. Lexicographic order is also often referred to as alphabetical order or dictionary order. The hashes of previous transactions (in reverse byte order) are sorted in ascending order, lexicographically.In the case of two matching transaction hashes, the corresponding previous output indexes will be compared by their integer value in ascending order. If the previous output indexes match, the input data is considered equal.
Shuffle Mode: mixing (random indexing)To learn more about how “shuffle mode” works, we will first analyze the mechanisms using the example of a classic transaction. Current balance Of your wallet: 100 TKEY, coins are stored at different addresses:
x1. Address-contains 10 TKEY. x2. Address-contains 20 TKEY. x3. Address-contains 30 TKEY. x4. Address-contains 15 TKEY. x5. Address-contains 25 TKEY.
Addresses in the blockchain are identifiers that you use to send cryptocurrency to another person or to receive digital currency.In a classic transaction, if you need to send, for example, 19 TKEY — 100 TKEY will be sent to the network for “melting” coins, 19 TKEY will be sent to the Recipient, and ~80.9 TKEY will return to the newly generated address for “change” in your wallet.
In the blockchain explorer, you will see the transaction amount in the amount of 100 TKEY, where 80.99999679 TKEY is your change, 19 TKEY is the amount you sent and 0.00000321 is the transaction fee. Thus, in the blockchain search engine, most of your balance is shown in the transaction.
How does the shuffle mode work?Let’s look at a similar example: you have 100 TKEY on your balance, and you need to send 19 TKEY.
x1. Address-contains 10 TKEY. x2. Address-contains 20 TKEY. x3. Address-contains 30 TKEY. x4. Address-contains 15 TKEY. x5. Address-contains 25 TKEY.
You send 19 TKEY, the system analyzes all your addresses and balances on them and selects the most suitable ones for the transaction. To send 19 TKEY, the miners will be given coins with x2. Addresses, for a total of 20 TKEY. Of these, 19 TKEY will be sent to the recipient, and 0.99999679 TKEY will be returned to Your new address as change minus the transaction fee.
In the blockchain explorer, you will see the transaction amount in the amount of 20 TKEY, where 0.99999679 TKEY is Your change, 19 TKEY is the amount you sent and 0.00000321 is the transaction fee.
The shuffle mode has a cumulative effect. with each new transaction, delivery Addresses will be created and the selection of debit addresses/s that are most suitable for the transaction will change. Thus, if you store 1,000,000 TKEY in your wallet and want to send 1 TKEY to the recipient, the transaction amount will not display most of your balance but will select 1 or more addresses for the transaction.
Selecting the recovery method for each digital currency (Blockchain restore)Now you can choose the recovery method for each currency: API + Blockchain or blockchain.
Note: This is not a syncing process, but rather the choice of a recovery method for your wallet. Syncing takes place with the blockchain — regardless of the method you choose.https://preview.redd.it/gxsssuxrttx41.png?width=1080&format=png&auto=webp&s=cd9fe383618dda0e990e86485652ff95652a8481
What are the differences between recovery methods?
API + BlockchainIn order not to load the entire history of the blockchain, i.e. block and transaction headers, the API helps you quickly get point information about previous transactions. For example, If your transactions are located in block 67325 and block 71775, the API will indicate to the node the necessary points for restoring Your balance, which will speed up the “recovery” process.
As soon as the information is received, communication with the peers takes place and synchronization begins from the control point, then from this moment, all subsequent block loading is carried out through the blockchain. This method allows you to quickly restore Your existing wallet.
‘’-’’ The API server may fail.
BlockchainThis method loads all block headers (block headers + Merkle) starting from the BIP44 checkpoint and manually validates transactions.
‘’+’’ It always works and is decentralized. ‘’-’’ Loading the entire blockchain may take a long time.
Why do I need to switch the recovery method?If when creating a wallet or restoring it, a notification (!) lights up in red near the selected cryptocurrency, then most likely the API has failed, so go to Settings — Security Center — Privacy — Blockchain Restore — switch to Blockchain. Syncing will be successful.
Selecting the address formatYou can choose the address format not only for Bitcoin but also for Litecoin. Legacy, SegWit, Native SegWit. Go to Settings — Manage Wallets — Address Format.
Working at the code level
Enhanced validation of transactions and blocks in the networkDue to the increased complexity in the Tkeycoin network, we have implemented enhanced validation of the tkeycoin consensus algorithm, and this algorithm is also available for other cryptocurrencies.
What is the advantage of the enhanced validation algorithm for the userFirst, the name itself speaks for itself — it increases the security of the network, and second, by implementing the function — we have accelerated the work of the TkeySpace blockchain node, the application consumes even fewer resources than before.
High complexity is converted to 3 bytes, which ensures fast code processing and the least resource consumption on your device.
SynchronizationThe synchronization process has been upgraded. Node addresses are added to the local storage, and instant synchronization with nodes occurs when you log in again.
Checking for double-spendingTkeySpace eliminates “double-spending” in blockchains, which is very valuable in the Bitcoin and Litecoin networks.
For example, using another application, you may be sent a fake transaction, and the funds will eventually disappear from the network and your wallet because this feature is almost absent in most applications.Using TkeySpace — you are 100% sure that your funds are safe and protected from fraudulent transactions in the form of “fake” transactions.
The bloom filter to check for nodesAll nodes are checked through the bloom filter. This allows you to exclude fraudulent nodes that try to connect to the network as real nodes of a particular blockchain.
In practice, this verification is not available in applications, Tkeycoin — decided to follow a new trend and change the stereotypes, so new features such as node verification using the bloom filter and double-spending verification are a kind of innovation in applications that work with cryptocurrencies.
Updating the Binance and Ethereum librariesUpdated Binance and Ethereum libraries for interaction with the TOR network.
Function — to hide the balanceThis function allows you to hide the entire balance from the main screen.
Advanced currency charts and charts without authenticationDetailed market statistics are available, including volumes, both for 1 day and several years. Select the period of interest: 1 day, 7 days, 1 month, 3 months, 6 months, 1 year, 2 years.
In version 1.3.0, you can access charts without authentication. You can monitor the cryptocurrency exchange rate without even logging in to the app. If you have a pin code for logging in, when you open the app, swipe to the left and you will see a list of currencies.
NewsIn the market data section — in the tkeyspace added a section with current news of the cryptocurrency market.
Blockchain Explorer for TkeycoinTransaction verification for Tkeycoin is now available directly in the app.
Independent Commission entry for BitcoinTaking into account the large volume of the Bitcoin network, we have implemented independent Commission entry — you can specify any Commission amount.
For other currencies, smart Commission calculation is enabled based on data from the network. The network independently regulates the most profitable Commission for the sender.
New digital currenciesThe TkeySpace wallet supports +59 cryptocurrencies and tokens.
CryptocurrenciesTkeycoin (TKEY), Bitcoin (BTC), Litecoin (LTC), Ethereum (ETH), Bitcoin Cash (BCH), DASH, Binance (BNB), EOS.
StablecoinsTrueUSD (TUSD), Tether USD (USDT), USD Coin (USDC), Gemini Dollar (GUSD), STASIS EURO (EURS), Digix Gold Token (DGX), Paxos Standard (PAX), PAX Gold (PAXG), Binance USD (BUSD), EOSDT, Prospectors Gold (PGL).
ERC-20, BEP2, and EOS tokensNewdex (NDX), DigixDAO ERC-20 (DGD), Chainlink ERC-20 (LINK), Decentraland ERC-20 (MANA), EnjinCoin ERC-20 (ENJ), the Native Utility (NUT), 0x Protocol ERC-20 (ZRX), Aelf ERC-20 (ELF), Dawn DAO ERC-20 (AURA), Cashaaa BEP2 (CAS), Bancor ERC-20 (BNT), the Basic Attention Token ERC-20 (BAT), Golem ERC-20 (GNT), Mithril ERC-20 (MITH), MEETONE, NEXO ERC-20, Holo ERC-20 (HOT), Huobi Token ERC-20 (HT), IDEX ERC-20, IDEX Membership ERC-20 (IDXM), Bitcoin BEP2 (BTCB), Waltonchain ERC-20 (WTC), KuCoin Shares ERC-20 (KCS), Kyber Network Crystal ERC-20 (KNC), Loom Network ERC-20 (LOOM), Ripple (XRP), Everipedia (IQ), Loopring ERC-20 (LRC), Maker ERC-20 (MKR), the Status of the ERC-20 (SNT), Ankr Network BEP2 (ANKR), OmiseGO ERC-20 (OMG), ^ american English ERC-20 (^american English), Polymath ERC-20 (POLY), Populous ERC-20 (PPT), Pundi X ERC-20 (NPXS), Parser ERC-20 (REP), Revain ERC-20 (R), Binance ERC20 (BNB-ERC20), Gifto BEP2 (GTO).
Exchange of cryptocurrencyThe “Limitless Crypto Exchange” tab is available for a quick transition to an unlimited exchange in 200 digital currencies — 10,000 currency pairs.
How do I update TkeySpace to version 1.3.0?
Original article here: https://medium.com/wanchain-foundation/ama-with-wanchain-vp-lini-58ada078b4fesubmitted by maciej_wan to wanchain [link] [comments]
“What is unique about us is that we have actually put theory into practice.”https://preview.redd.it/n6lo2xcmtn621.png?width=800&format=png&auto=webp&s=281acce4b45eed8acf0c52b201d01cb6f0d13507
Wanchain’s Vice President of Business Development, Lini, sat down with blockchain media organization Neutrino for an AMA covering a wide range of topics concerning Wanchain’s development.
The following is an English translation of the original Chinese AMA which was held on December 13th, 2018:
Neutrino: Could you please first share with us a little basic background, what are the basic concepts behind cross chain technology? What are the core problems which are solved with cross-chain? In your opinion, what is the biggest challenge of implementing cross chain to achieve value transfer between different chains?
Lini: Actually, this question is quite big. Let me break it down into three smaller parts:
In China, we like to use the word “cross-chain”, the term “interoperability” is used more frequently in foreign countries. Interoperability is also one of the important technologies identified by Vitalik for the development of a future blockchain ecosystem mentioned in the Ethereum white paper. So cross-chain is basically the concept of interoperability between chains.
In essence, blockchain is a distributed bookkeeping technique, also known as distributed ledger technology. Tokens are the core units of account on each chain, there currently exist many different chains, each with their own token. Of especial importance is the way in which each ledger uses tokens to interact with each other for the purpose of clearing settlements.
Cross chain technology is one of the foundational technological infrastructures that is necessary for the large scale application of blockchain technology.
Neutrino: As we all know, there are many different kinds of cross-chain technologies. Please give us a brief introduction to several popular cross-chain technologies on the market, and the characteristics of each of these technologies。
Lini: Before answering this question, it is very important to share two important concepts with our friends: heterogeneity and homogeneity, and centralization and decentralization.
These two points are especially important for understanding various cross-chain technologies, because there are many different technologies and terminologies, and these are some of the foundational concepts needed for understanding them.
There are also two core challenges which must be overcome to implement cross-chain:
Combining the above two points, we look at the exploration of some solutions in the industry and the design concepts of other cross-chain projects.
First I’d like to discuss the Relay solution.
However the Relay solution must consume a relatively large amount of gas to read the BTC header. Another downside is that, as we all know, Bitcoin’s blocks are relatively slow, so the time to wait for verification will be long, it usually takes about 10 minutes to wait for one block to confirm, and the best practice is to wait for 6 blocks.
The next concept is the idea of Sidechains.
This solution is good, but not all chains contain SPV, a simple verification method. Therefore, there are certain drawbacks. Of course, this two way peg way solves challenge beta very well, that is, the atomicity of the transaction.
These two technical concepts have already been incorporated into a number of existing cross chain projects. Let’s take a look at two of the most influential of these.
The first is Polkadot.
This is just a summary based on Polkadot’s whitepaper and most recent developments. The theoretical design is very good and can solve challenges alpha and beta. Last week, Neutrino organized a meetup with Polkadot, which we attended. In his talk, Gavin’s focus was on governance, he didn’t get into too much technical detail, but Gavin shared some very interesting ideas about chain governance mechanisms! The specific technical details of Polkadot may have to wait until after their main net is online before it can be analyzed.
Next is Cosmos.
Cosmos is a star project who’s basic concept is similar to Polkadot. Cosmos’s approach is based on using a central hub. Both projects both take into account the issue of heterogeneous cross-chain transactions, and both have also taken into account how to solve challenges alpha and beta.
To sum up, each research and project team has done a lot of exploration on the best methods for implementing cross-chain technology, but many are still in the theoretical design stage. Unfortunately, since the main net has not launched yet, it is not possible to have a more detailed understanding of each project’s implementation. A blockchain’s development can be divided into two parts: theoretical design, and engineering implementation. Therefore, we can only wait until after the launch of each project’s main network, and then analyze it in more detail.
Neutrino: As mentioned in the white paper, Wanchain is a general ledger based on Ethereum, with the goal of building a distributed digital asset financial infrastructure. There are a few questions related to this. How do you solve Ethereum’s scaling problem? How does it compare with Ripple, which is aiming to be the standard trading protocol that is common to all major banks around the world? As a basic potential fundamental financial infrastructure, what makes Wanchain stand out?
Lini: This question is actually composed of two small questions. Let me answer the first one first.
The TPS of Ethereum is not high at this stage, which is limited by various factors such as the POW consensus mechanism. However, this point also in part is due to the characteristics of Ethereum’s very distributed and decentralized features. Therefore, in order to improve TPS, Wanchain stated in its whitepaper that it will launch its own POS consensus, thus partially solving the performance issues related to TPS. Wanchain’s POS is completely different from the POS mechanism of Ethereum 2.0 Casper.
Of course, at the same time, we are also paying close attention to many good proposals from the Ethereum community, such as sharding, state channels, side chains, and the Raiden network. Since blockchain exists in the world of open source, we can of course learn from other technological breakthroughs and use our own POS to further improve TPS. If we have some time at the end, I’d love to share some points about Wanchain’s POS mechanism.
Wanchain is focused on different use cases, it is to act as a bridge between different tokens and tokens, and between assets and tokens. For various cross-chain applications it is necessary to consume WAN as a gas fee to pay out to nodes.
So it seems that the purpose Ripple and Wanchain serve are quite different. Of course, there are notary witnesses in the cross-chain mechanism, that is, everyone must trust the middleman. Ripple mainly serves financial clients, banks, so essentially everyone’s trust is already there.
Neutrino: We see that Wanchain uses a multi-party computing and threshold key sharing scheme for joint anchoring, and achieves “minimum cost” for integration through cross-chain communication protocols without changing the original chain mechanism. What are the technical characteristics of multi-party computing and threshold key sharing? How do other chains access Wanchain, what is the cross-chain communication protocol here? What is the cost of “minimum cost?
Lini: The answer to this question is more technical, involving a lot of cryptography, I will try to explain it in a simple way.
In sMPC multiple parties each holding their own piece of private data jointly perform a calculation (for example, calculating a maximum value) and obtain a calculation result. However, in the process, each party involved does not leak any of their respective data. Essentially sMPC calculation can allow for designing a protocol without relying on any trusted third parties, since no individual ever has access to the complete private information.
Secure multiparty computing can be abstractly understood as two parties who each have their own private data, and can calculate the results of a public function without leaking their private data. When the entire calculation is completed, only the calculation results are revealed to both parties, and neither of them knows the data of the other party and the intermediate data of the calculation process. The protocol used for secure multiparty computing is homomorphic encryption + secret sharing + OT (+ commitment scheme + zero knowledge proofs, etc.)
Wanchain’s 21 cross chain Storeman nodes use sMPC to participate in the verification of a transaction without obtaining of a user’s complete private key. Simply put, the user’s private key will have 21 pieces given to 21 anonymous people who each can only get 1/21 part, and can’t complete the whole key.
Wanchain uses the threshold M<=N; N=21; M=16. That is to say, at least 16 Storeman nodes must participate in multi-party calculation to confirm a transaction. Not all 21 Storeman nodes are required to participate. This is a solution to the security problem of managing private keys.
Cross-chain communication protocols refers to the different communication methods used by different chains. This is because heterogeneous cross-chain methods can’t change the mechanism of the original chains. Nakamoto and Vitalik will not modify their main chains because they need BTC and ETH interoperability. Therefore, project teams that can only do cross-chain agreements to create different protocols for each chain to “talk”, or communicate. So the essence of a cross-chain protocol is not a single standard, but a multiple sets of standards. But there is still a shared sMPC and threshold design with the Storeman nodes.
The minimum cost is quite low, as can be shown with Wanchain 3.0’s cross chain implementation. In fact it requires just two smart contracts, one each on Ethereum and Wanchain to connect the two chains. To connect with Bitcoin all that is needed is to write a Bitcoin script. Our implementation guarantees both security and decentralization, while at the same time remaining simple and consuming less computation. The specific Ethereum contract and Bitcoin scripts online can be checked out by anyone interested in learning more.
Neutrino: What kind of consensus mechanism is currently used by Wanchain? In addition, what is the consensus and incentive mechanism for cross-chain transactions, and what is the purpose of doing so? And Wanchain will support cross-chain transactions (such as BTC, ETH) on mainstream public chains, asset cross-chain transactions between the alliance chains, and cross-chain transactions between the public and alliance chains, how can you achieve asset cross-chain security and privacy?
Lini: It is now PPOW (Permissioned Proof of Work), in order to ensure the reliability of the nodes before the cross-chain protocol design is completed, and to prepare to switch to POS (as according to the Whitepaper roadmap). The cross-chain consensus has been mentioned above, with the participation of a small consensus (at least 16 nodes) in a set of 21 Storeman nodes through sMPC and threshold secret sharing.
In addition, the incentive is achieved through two aspects: 1) 100% of the cross chain transaction fee is used to reward the Storeman node; 2) Wanchain has set aside a portion of their total token reserve as an incentive mechanism for encouraging Storeman nodes in case of small cross-chain transaction volume in the beginning.
It can be revealed that Storeman participation is opening gradually and will become completely distributed and decentralized in batches. The first phase of the Storeman node participation and rewards program is to be launched at the end of 2018. It is expected that the selection of participants will be completed within one quarter. Please pay attention to our official announcements this month.
In addition, for public chains, consortium chains, and private chains, asset transfer will also follow the cross-chain mechanism mentioned above, and generally follow the sMPC and threshold integration technology to ensure cross-chain security.
When it comes to privacy, this topic will be bigger. Going back to the Wanchain Whitepaper, we have provided privacy protection on Wanchain mainnet. Simply put, the principle is using ring signatures. The basic idea is that it mixes the original address with many other addresses to ensure privacy. We also use one-time address. In this mechanism a stamp system is used that generates a one-time address from a common address. This has been implemented since our 2.0 release.
But now only the privacy protection of native WAN transactions can be provided. The protection of cross-chain privacy and user experience will also be one of the important tasks for us in 2019.
Neutrino: At present, Wanchain uses Storeman as a cross-chain trading node. Can you introduce the Storeman mechanism and how to protect these nodes?
Lini: Let me one problem from two aspects.
Neutrino: On December 12th, the mainnet of Wanchain 3.0 was launched. Wanchain 3.0 opened cross-chain transactions between Bitcoin, Ethereum and ERC20 (such as MakerDao’s stable currency DAI and MKR). What does this version mean for you and the industry? This upgrade of cross-chain with Bitcoin is the biggest bright spot. So, if now you are able to use Wanchain to make transactions between what is the difference between tokens, then what is the difference between a cross chain platform like Wanchain and cryptocurrency exchanges?
Lini: The release of 3.0 is the industry’s first major network which has crossed ETH and BTC, and it has been very stable so far. As mentioned above, many cross-chain, password-protected theoretical designs are very distinctive, but for engineering implementation, the whether or not it can can be achieved is a big question mark. Therefore, this time Wanchain is the first network launched in the world to achieve this. Users are welcome to test and attack. This also means that Wanchain has connected the two most difficult and most challenging public networks. We are confident we will soon be connecting other well-known public chains.
At the same time of the release of 3.0, we also introduced cross chain integration with other ERC20 tokens in the 2.X version, such as MakerDao’s DAI, MKR, LRC, etc., which also means that more tokens of excellent projects on Ethereum will also gradually be integrated with Wanchain.
Some people will be curious, since Wanchain has crossed so many well-known public chains/projects; how is it different with crypto exchanges? In fact, it is very simple, one centralized; one distributed. Back to the white paper of Nakamoto, is not decentralization the original intention of blockchain? So what Wanchain has to do is essentially to solve the bottom layer of the blockchain, one of the core technical difficulties.
Anyone trying to create a DEX (decentralized exchange); digital lending and other application scenarios can base their application on Wanchain. There is a Wanchain based DEX prototype made by our community members Jeremiah and Harry, which quite amazing. Take a look at this video below.
Neutrino: What are the specific application use cases after the launch of Wanchain 3.0? Most are still exploring small-scale projects. According to your experience, what are the killer blockchain applications of the future? What problems need to be solved during this period? How many years does it take?
Lini: As a cross-chain public chain, we are not biased towards professional developers or ordinary developers, and they are all the same. As mentioned above, we provide a platform as infrastructure, and everyone is free to develop applications on us.
For example, if it is a decentralized exchange, it must be for ordinary users to trade on; if it is some kind of financial derivatives product, it is more likely to be used by finance professionals. As for cross-chain wallets which automatically exchange, I’m not sure if you are talking about distributed exchanges, the wallet will not be “automatic” at first, but you can “automatically” redeem other tokens.
Finally, the remaining WAN tokens are strictly in accordance with the plan laid out in the whitepaper. For example, the POS node reward mentioned above will give 10% of the total amount for reward. At the same time, for the community, there are also rewards for the bounty program. The prototype of the DEX that I just saw is a masterpiece of the overseas community developers, and also received tokens from our incentive program.
Neutrino community member’s question: There are many projects in the market to solve cross-chain problems, such as: Cosmos, Polkadot, what are Wanchain’s advantages and innovations relative to these projects?
Lini: As I mentioned earlier, Cosmos and pPolkadot all proposed very good solutions in theory. Compared with Wanchain, I don’t think that we have created anything particularly unique in our theory. The theoretical basis for our work is cryptography, which is derived from the academic foundation of scholars such as Yao Zhizhi and Silvio Micali. Our main strong point is that we have taken theory and put it into practice..
Actually, the reason why people often question whether a blockchain project can be realized or not is because the whitepapers are often too ambitious. Then when they actually start developing there are constant delays and setbacks. So for us, we focus on completing our very solid and realizable engineering goals. As for other projects, we hope to continue to learn from each other in this space.
Neutrino community member Amos from Huobi Research Institute question: How did you come to decide on 21 storeman nodes?
Lini: As for the nodes we won’t make choices based on quantity alone. The S in the POS actually also includes the time the tokens are staked, so that even if a user is staking less tokens, the amount of time they stake them for will also be used to calculate the award, so that is more fair. We designed the ULS (Unique Leader Selection) algorithm in order to reduce the reliance on the assumption of corruption delay (Cardano’s POS theory). which is used for ensuring fairness to ensure that all participants in the system can have a share of the reward, not only few large token holders.
Wu Di, a member of the Neutrino community: Many big exchanges have already begun to deploy decentralized exchanges. For example, Binance, and it seems that the progress is very fast. Will we be working with these influential exchanges in the future? We we have the opportunity to cooperate with them and broaden our own influence?
Lini: I also have seen some other exchange’s DEX. Going back the original point, distributed cross-chain nodes and centralized ones are completely different. I’m guessing that most exchanges use a centralized cross-chain solution, so it may not be the same as the 21 member Storeman group of Wanchain, but I think that most exchanges will likely be using their own token and exchange system. This is my personal understanding. But then, if you are developing cross chain technology, you will cooperate with many exchanges that want to do a DEX. Not only Binance, but also Huobi, Bithumb, Coinbase… And if there is anyone else who would like to cooperate we welcome them!
Neutrino community member AnneJiang from Maker: Dai as the first stable chain of Wanchain will open a direct trading channel between Dai and BTC. In relation to the Dai integration, has any new progress has been made on Wanchain so far?
Lini: DAI’s stable currency has already been integrated on Wanchain. I just saw it yesterday, let me give you a picture. It’s on the current 3.0 browser, https://www.wanscan.org/, you can take a look at it yourself.
This means that users with DAI are now free to trade for BTC, or ETH or some erc20 tokens. There is also a link to the Chainlink, and LRC is Loopring, so basically there are quite a few excellent project tokens. You may use the Wanchain to trade yourself, but since the DEX is not currently open, currently you can only trade with friends you know.
About NeutrinoNeutrino is a distributed, innovative collaborative community of blockchains. At present, we have established physical collaboration spaces in Tokyo, Singapore, Beijing, Shanghai and other places, and have plans to expand into important blockchain innovation cities such as Seoul, Thailand, New York and London. Through global community resources and partnerships, Neutrino organizes a wide range of online an offline events, seminars, etc. around the world to help developers in different regions better communicate and share their experiences and knowledge.
About WanchainWanchain is a blockchain platform that enables decentralized transfer of value between blockchains. The Wanchain infrastructure enables the creation of distributed financial applications for individuals and organizations. Wanchain currently enables cross-chain transactions with Ethereum, and today’s product launch will enable the same functionalities with Bitcoin. Going forward, we will continue to bridge blockchains and bring cross-chain finance functionality to companies in the industry. Wanchain has employees globally with offices in Beijing (China), Austin (USA), and London (UK).
You can find more information about Wanchain on our website. Additionally, you can reach us through Telegram, Discord, Medium, Twitter, and Reddit. You can also sign up for our monthly email newsletter here.
Bitdeal mining script to start bitcoin mining business "Don't fear about the hurdles, bitdeal stands near you." We lift you and prevent you from falling down. To know more about the bitdeal bitcoin mining script feel free to inquire our team. Bitdeal gives you the 24X 7 support to launch your bitcoin mining business. If you have an idea to ASK FOR A DEMO, Place a free order here! Prev Next ... Bitcoin GPU Mining ️ 💲 Script Hack Win7BTC💲💰💲 Working 100% Link: Contacts: [email protected] Facebook: Youtube: Free Bitcoin Earn Bitcoin Buy Bitcoin Sell Bitcoin Mining Bitcoin Bitcoin Bitcoin Hack Hack Bitcoin Script Bitcoin Hack Script Hack Bitcoin Cryptocurrency ETH,BTC,BCH,ETC bitcoin software 2019, bitcoin software generator, bitcoin software wallet, bitcoin ... Now anyone can start bitcoin mining website,by using our BTC mining script software. Pulsehyip Bitcoin mining script is very powerful & fully automated software it's enabling you to start, manage & maintain BTC mining program. Before that you have an in-depth knowledge about bitcoin mining! Bitcoin mining script - The finest web solution to simplify the bitcoin mining process, and to start bitcoin mining as a business.It is a script/software that can be installed or deployed in the hardware/server which you used to mine bitcoins. The main functionality of this application is to split the power into hash power (the computing power). What is binance clone script? Binance clone is a crypto exchange platform with bug free source code and serviceable features like binance. Also, our distinctive features, such as special customization functionalists, can make your binance clone more efficient and user-friendly. We additionally provide a trusted crypto wallet where the trader can store their digital funds, token currency ... Starting a cryptocurrency exchange was a complex one, before three years. But now, the complexity has been diminished in to more less with the existence of technical resources like, development team, software's, and web tools like bitcoin exchange script. Our Readymade Bitcoin Trading Script like Binance, Bittrex, and Poloniex helps you to set up your own cryptocurrency Trading platform in 2 hours. The powerful Trading Engine plugged with our Cryptocurrency Trading Script makes it the best Free Demo. OTC Exchange platform . Cryptocurrency exchange Software similar to coinbase.com, luno.com, and coinmama.com provides a great deal of investment ... How to download bitcoin wallet hack. How to download bitcoin hacks and scripts from our website? Everything is very simple, downloading our launcher, you get a free key, for trial testing, which comes to your e-mail, after registering in the system, select the desired script and upload it to your PC, each script contains instructions with detailed launch and solution of possible problems. This is not the first year that BitMix.Biz has been the best Bitcoin mixer and it will probably remain so in 2020. This is proved by that on the Internet there are many fakes posing as BitMix.Biz.
[index]